Windows 10 News and info | Forum
November 20, 2017, Loading... *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This is a clean Ad-free Forum and protected by StopForumSpam, Project Honeypot and Botscout | This forum does not use audio ads, popups, or other annoyances.
 
  Website   Home   Windows 8 Website Windows 8 Forum Help Login Register  
Pages: [1]
  Print  
Share this topic on Del.icio.usShare this topic on DiggShare this topic on FacebookShare this topic on GoogleShare this topic on MySpaceShare this topic on RedditShare this topic on StumbleUponShare this topic on TechnoratiShare this topic on TwitterShare this topic on YahooShare this topic on Google buzz
Author Topic: This may be Microsoft’s USB-C compatible Surface connector but it’s not all good  (Read 67 times)
javajolt
Administrator
Hero Member
*****
Offline Offline

Gender: Male
United States United States

Posts: 27429


I Do Windows


WWW Email
« on: July 13, 2017, 04:20:26 PM »
ReplyReply



Microsoft received a lot of criticism for not replacing the Surface connector in their new range of Surface devices with USB-C ports, but Microsoft has insisted they were simply not happy with the user experience the port provides, noting elements such as lack of easy attachment and easy detachment, useful to prevent tripping issues.

Now from a new patent, in part created by Jan Raken, Director of Surface Design,  it appears Microsoft does indeed have a solution in the wings ready for the next generation of Surface tablets, which will marry the advantage of the Surface connector with compatibility with the growing USB-C standard.



The new connector would be smaller and thinner than the current Surface connector (above), but would still feature magnets allowing it to click in place without any effort, and detach easily if you trip over the wire and not pull your PC down.

The connector would feature a tapered design which would allow it to slip into a USB-C female slot without force being required. It would also feature a number of adaptations to make it a low profile connector.

It would only support USB 2 speeds, for example, meaning it would need less electromagnetic shielding and can, therefore, be shorter (power would still be delivered over the connection). It would also not include the 6 external electrical contacts/wires of a usual USB-C connector, which would also facilitate the short tapered shape, and would lack the springs in the usual USB-C male connector, being held in place instead with magnets instead.

The result is a very compromised connector on the male end (which I suspect would not be able to support a powerful docking station for example), but the female side should still be fully USB-C compatible, meaning you could still plug in an array of standard USB-C dongles and devices when needed.

Whether this would satisfy the critics, of course, remains to be seen.

The full patent, which was applied for in February 2016,  can be seen here.

source
Logged



Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2017, Simple Machines

Google visited last this page October 10, 2017, 12:03:46 PM