Users can use hardware security keys, manufactured by Swedish company Yubico to log into a Local account on Windows 10. The company recently released the first stable version of the Yubico
Login for Windows application . In this post, we will show you how to install and configure
YubiKey for use on Windows 10 PCs.
YubiKey is a hardware authentication device that supports one-time passwords, public-key encryption and authentication, and the
Universal 2nd Factor (
U2F ) and
FIDO2 protocols developed by the FIDO Alliance. It allows users to securely log in to their accounts by emitting one-time passwords or using a FIDO-based public/private key pair generated by the device. YubiKey also allows for storing static passwords for use at sites that do not support one-time passwords.
Facebook uses YubiKey for employee credentials, and
Google supports it for both employees and users. Some password managers support YubiKey. Yubico also manufactures the Security Key, a device similar to the YubiKey, but focused on public-key authentication.
YubiKey allows users to sign, encrypt, and decrypt messages without exposing the private keys to the outside world. This feature was previously available only for Mac & Linux users.
To configure/set up YubiKey on Windows 10, you’ll need the following: ■ A YubiKey USB hardware.
■ Yubico Login software for Windows.
■ YubiKey Manager software.
All of them are available on
yubico.com under their Products tab. Also, you should note that the YubiKey app does not support local Windows accounts managed by Azure Active Directory (AAD) or Active Directory (AD) as well as Microsoft Accounts.
YubiKey hardware authentication device Before installing the Yubico Login for Windows software, make a note of your Windows username and password for the local account. The person who installs the software must have the Windows username and password for their account. Without these, nothing can be configured, and the account is inaccessible. The default behavior of the Windows credential provider is to remember your last login, so you do not have to type in the username.
For this reason, many people may not remember the username. However, once you install the tool and reboot, the new Yubico credential provider is loaded, so that both admins and end-users have actually to type in the username. For these reasons, not only the admin but also everybody whose account is to be configured via Yubico Login for Windows should check to ensure that they can log in using the Windows username and password for their local account BEFORE the admin installs the tool and configures end-users’ accounts.
It’s also imperative to note that, once Yubico Login for Windows has been configured, there is:
■ No Windows Password Hint
■ No way to reset passwords
■ No, Remember Previous User/Login function.
Additionally, Windows automatic login is not compatible with Yubico Login for Windows. If a user whose account was set up for automatic login no longer remembers their original password when the Yubico Login for Windows configuration takes effect, the account can no longer be accessed. Address this issue preemptively by:
■ Having users set new passwords before disabling automatic login.
■ Have all users verify they can access their accounts with username and their new password
before you use Yubico Login for Windows to configure their accounts.
Administrator permissions are required to install the software.
YubiKey Installation First, verify your username. Once you have installed Yubico Login for Windows and rebooted, you will need to enter this in addition to your password to log in. To do this, open Command Prompt or PowerShell from the Start menu and run the command below.
whoami Take note of the full output, which should be in the form
DESKTOP-1JJQRDFjdoe , where
jdoe is the username.
■ Download the Yubico Login for Windows software from
here .
■ Run the installer by double-clicking on the download.
■ Accept the end-user license agreement.
■ In the installation wizard, specify the destination folder location or accept the default location.
■ Restart the machine on which the software has been installed. After the restart, the Yubico
credential provider presents the login screen that prompts for the YubiKey.
Because the YubiKey has not yet been provisioned, you must switch user and enter not only the password for your local Windows account but also your username for that account. If necessary, you may have to change Microsoft Account to Local Account.
After you have logged in, search for “Login Configuration” with the green icon. (The item actually labeled Yubico Login for Windows is just the installer, not the application.)
YubiKey Configuration
Administrator permissions are required to configure the software.
Only accounts that are supported can be configured for Yubico Login for Windows. If you launch the configuration wizard, and the account you are looking for is not displayed, it is not supported and therefore not available for configuration.
During the configuration process, the following will be required;
■
Primary and Backup Keys : Use a different YubiKey for each registration. If you are
configuring backup keys, each user should have one YubiKey for the primary and a second
one for the backup key.
■
Recovery Code : A recovery code is a last-resort mechanism to authenticate a user if all
YubiKeys have been lost. Recovery codes can be assigned to the users you specify; however,
the recovery code is only usable if the username and password for the account are also
available. The option to generate a recovery code is presented during the configuration
process.
Step 1: In the Windows
Start menu, select
Yubico >
Login Configuration .
Step 2: The User Account Control dialog appears. If you are running this from a non-Administrator account, you will be prompted for local administrator credentials. The Welcome page introduces the Yubico Login Configuration provisioning wizard:
Step 3: Click
Next . The Default page of Yubico Windows Login Configuration appears.
Step 4: The configurable items are:
Slots : Select the slot where the challenge-response secret will be stored. All YubiKeys that have not been customized come pre-loaded with a credential in slot 1, so if you are using Yubico Login for Windows to configure YubiKeys that are already being used for logging into other accounts, do not overwrite slot 1.
Challenge/Response Secret : This item enables you to specify how the secret will be configured and where it will be stored. The options are:
Use existing secret if configured – generate if not configured: The key’s existing secret will be used in the specified slot. If the device has no existing secret, the provisioning process will generate a new secret.
Generate new, random secret, even if a secret is currently configured : A new secret will be generated and programmed to the slot, overwriting any previously configured secret.
Manually input secret : For advanced users: During the provisioning process, the application will prompt you to input manually an HMAC-SHA1 secret (20 bytes – 40 characters hex-encoded).
Generate Recovery Code : For each user provisioned, a new recovery code will be generated. This recovery code enables the end-user to log in to the system if they have lost their YubiKey.
Note: If you select to save a recovery code while provisioning a user for a second key, any previous recovery code becomes invalid, and only the new recovery code will work.
Create Backup Device for Each User : Use this option to have the provisioning process register two keys for each user, a primary YubiKey and a backup YubiKey. If you do not want to provide recovery codes to your users, it is good practice to give each user a backup YubiKey. For more information, refer to the Primary and Backup Keys section above.
Step 5: Click
Next , to select the user(s) to provision. The
Select User Accounts page (If there are no local user accounts supported by Yubico Login for Windows, the list will be empty) appears.
Step 6: Select the user accounts to be provisioned during the current run of the Yubico Login for Windows by selecting the checkbox next to the username, and then click
Next . The
Configuring User page appears.
Step 7: The username shown in the Configuring User field shown above is the user for whom a YubiKey is currently being configured. As each username is displayed, the process prompts you to insert a YubiKey to register for that user.
Step 8: The
Wait for Device page is shown while an inserted YubiKey is being detected and before it is registered for the user whose username is in the Configuring User field at the top of the page. If you have selected
Create Backup Device for Each User in the Defaults page, the Configuring User field will also display which of the YubiKeys is being registered,
Primary or
Backup .
Step 9: If you have configured the provisioning process to use a manually specified secret, the field for the 40 hex-digit secrets is displayed. Enter the secret and click
Next .
Step 10: The Programming Device page displays the progress of programming each YubiKey. The
Device Confirmation page shown below displays the details of the YubiKey detected by the provisioning process, including the device serial number (if available) and the configuration status of each One-Time Password (OTP) slot. If there are conflicts between what you have set as defaults and what is possible with the detected YubiKey, a warning symbol is displayed. If everything is good to go, a checkmark will be shown. If the status line shows an error icon, the error is described, and instructions for fixing it are displayed on the screen.
Step 11: Once programming is complete for a user account, that account can no longer be accessed without the corresponding YubiKey. You are prompted to remove the YubiKey just configured, and the provisioning process automatically proceeds to the next user account/YubiKey combination.
Step 12: After all, the YubiKeys for the specified user account have been provisioned:
■ If the Generate Recovery Code was selected on the Defaults page, the Recovery Code page is
displayed.
■ If Generate Recovery Code was not selected, the provisioning process would automatically
continue to the next user account.
■ The provisioning process moves to Finish after the last user account is done.
The recovery code is a long string. (To eliminate problems caused by the end-user mistaking the numeral 1 for lowercase letter L and 0 for the letter O, the recovery code is encoded in Base32, which treats alphanumeric characters that look similar as if they were the same.)
The
Recovery Code page is displayed after all the YubiKeys for the specified user account has been configured.
Step 13: On the Recovery Code page, generate and set a recovery code for the selected user. Once this has been done, the
Copy and
Save buttons to the right of the recovery code field become available.
Step 14: Copy the recovery code and save it from being shared with the user and keep it in case the user loses it.
Note : Be sure to save the recovery code at this point in the process. Once you proceed to the next screen, it is not possible to retrieve the code.
Step 15: To move to the next user account from the
Select Users page, click
Next . When you have configured the last user, the provisioning process displays the
Finished page.
Step 16: Give each user their recovery code. End-users should save their recovery code to a safe location accessible when they cannot log in.
YubiKey User Experience When the local user account has been configured to require a YubiKey, the user is authenticated by the
Yubico Credential Provider instead of the default Windows Credential Provider. The user is prompted to insert their YubiKey. Then the Yubico Login screen is presented. The user enters their username and password.
Note : It is not necessary to press the button on the YubiKey USB hardware to log in. In some instances, pressing the button causes the login to fail.
When the end-user logs in, they must insert the correct YubiKey into a USB port on their system. If the end-user enters their username and password without inserting the correct YubiKey, authentication will fail, and the user will be presented with an error message.
If an end user’s account is configured for Yubico Login for Windows, and if a recovery code was generated, and a user loses their YubiKey(s), they can use their recovery code to authenticate. The end-user unlocks their computer with their username, recovery code, and password.
Until a new YubiKey is configured, the end-user must enter the recovery code each time they log in.
VIDEO If
Yubico Login for Windows does not detect that a YubiKey has been inserted, it is likely due to the key not having OTP mode enabled, or you are not inserting a YubiKey, but instead a Security Key, which is not compatible with this application. Use the
YubiKey Manager application to ensure that all the YubiKeys to be provisioned have the OTP interface enabled.
Important : Alternative sign-in methods supported by Windows will not be affected. You must, therefore, restrict additional local and remote login methods for the user accounts you are protecting with Yubico Login for Windows to ensure you have not left open any ‘back doors.’
source 
