Author Topic: AMD's Eyefinity Technology Explained 1 of 1  (Read 1592 times)

Offline javajolt

  • Administrator
  • Hero Member
  • *****
  • Posts: 36142
  • Gender: Male
  • I Do Windows
    • windows10newsinfo.com
AMD's Eyefinity Technology Explained 1 of 1
« on: March 03, 2010, 06:56:06 PM »

Major changes to the PC graphics experience come few and far in between. Perhaps the last significant update was the move to multi-GPU rendering, a la ATI CrossFire. Of course, despite the well-known performance benefits of employing multiple GPUs, the technology has some obvious drawbacks. More than one motherboard slot is usually required for multi-GPU configurations, which in turn means that you wind up consuming two or more cards worth of power, rather than just one.

On the application front, you're free to span a desktop across multiple screens, running multiple apps across one or more displays concurrently. However, traditionally, spanning an application across more than one screen meant that it had to be non-accelerated. You could have size or you could have speed, but you couldn’t have both.

CAVE


http://i46.tinypic.com/zyg7r5.jpg

Times have changed. AMD’s new Eyefinity technology takes us to the next level in mainstream multi-monitor output. Known as “SunSpot” to only a handful within AMD up until its launch day, Eyefinity enables up to six monitors to be controlled from one card, enabling a massive “surface” area exceeding 24 megapixels. If you read AMD’s literature on Eyefinity, it says that “we are inexorably on the road to the ‘holodeck’ (as conceptualized on Star Trek).” Given that the Star Trek holodeck involved haptics (tactile feedback) based on force fields and such, this might be a tad hyperbolic. A better, if less-known, analogy might be the CAVE (Cave Automatic Virtual Environment), a small chamber comprised of three to six screens showing rear-mounted 3D projections. Dozens of universities use CAVE systems for research around the world, so imagining a consumer version of CAVE enabled by AMD’s technology isn’t at all far-fetched. If you’ve read Fahrenheit 451 and recall the three-walled, immersive home entertainment systems Bradbury imagined, that’s where Eyefinity (with a little help from ultra-high-speed broadband) is headed.             

If your primary PC is a single-screen notebook, the thought of having six monitors may seem overwhelming and excessive. So let’s be clear at the outset: Eyefinity is a means, not an end. If CrossFire was ATI/AMD’s method for helping consumers go multi-GPU, then Eyefinity is the next evolution of that. The object is not to pile on as many screens as possible. Rather, the object is to make computing “surfaces,” the real estate on which you visualize a computer-generated environment, as scalable as possible.

Today, DisplayPort is a key piece in making that scalability happen, as is a redesign in how multi-monitor computing happens on the video card. Let’s dig in and see what Eyefinity really is and does.

amd-eyefinity-graphic-card


http://i45.tinypic.com/6zn800.jpg

Leaping Beyond Two Screens

There are different ways to create a multi-monitor surface. Nvidia drew some eyeballs at CES 2010 with the demonstration of its 3D Vision Surround technology, but this approach required two boards, controlled and synchronized with software. Each card could still only output to two displays, as they’ve done for years. There was no increase in hardware-based surface scalability. The implementation still required two cards, an SLI-capable motherboard to run them, and more overall power compared to a single-card solution.

With Eyefinity, one card can drive up to six displays (depending on the model, of course). AMD states that all 5000-series GPUs support Eyefinity. However, it falls to the graphics card manufacturer to decide whether and how Eyefinity will be implemented on a given card. As of this writing, only the 5800 models have Eyefinity enabled in CrossFire mode, and it seems reasonable to expect that bandwidth plays a part in this decision. With the Radeon HD 5970 freshly placing AMD back in the lead for desktop GPU performance, the last thing AMD wants to risk is a bunch of 5400-series buyers trying to span Left 4 Dead 2 across three screens at maximum settings and wondering what why it isn’t playable. Having the display connectivity for multiple displays is one thing, but putting the muscle behind those pipelines is something else, and vendors need to pair their output paths and GPUs appropriately.

5770 three quarters


http://i49.tinypic.com/1440mx5.jpg

Just to be clear, the Radeon HD 4000-series GPUs and all of their predecessors do not support Eyefinity. The GPUs, good as they were, don’t have the horsepower or display output connectivity needed to fuel more than two high-resolution displays.

“For 2D applications, like for productivity work, the bandwidth load is no problem at all,” says Shane Parfitt, product manager in AMD’s GPU division. “Where you get into performance situations is 3D games with 3x the number of pixels in a 3x1 configuration. That’s definitely harder on the GPU. Our GPUs right now are the most powerful on the planet. We test with 30" panels—the 2560x1600 panels with over 6 million pixels each. Sometimes, you might have to turn down the anti-aliasing settings in order for a game to run at at least 30 fps. An average case of 19x12 running across three panels, we find, performs pretty well, especially with the higher-end cards.”

What about harnessing two or more GPUs to buy more multi-display bandwidth?

Eyefinity Immersion


http://i49.tinypic.com/2z4l5p4.jpg

“We’re just now rolling CrossFire support out,” says Parfitt. “We had a lot of demand from the market for this feature, so we rolled it out in a hotfix driver. But it became an official feature in the February Catalyst release.”

Specifically, in November, the Radeon HD 5970 became the first GPU to support Eyefinity with CrossFire at a time when only 20 or so applications had been validated for CF/Eyefinity compatibility. Only three months later, the feature was enabled across the board. It deserves mention that making this happened required massive testing and troubleshooting effort on AMD’s part, and its driver crew should get bonus kudos for their beyond the call of duty labors.

Counting Pipes

Let’s say we’re dealing with an adapter able to keep three display outputs well-fed, such as a Radeon HD 5870. In this configuration grid, you can see the connectivity options for a four-port Eyefinity card. The card integrates two DVI ports, one HDMI, and one DisplayPort. Despite having four physical ports, the Eyefinity implementation allows for three actual output streams. One port is always disabled.

Configuration Grid


http://i47.tinypic.com/oix7j7.jpg

Under the hood, we can see the reason why only three displays are supported. The 5000-series designs host two internal clocks and one external clock. Legacy displays—now defined by AMD as VGA, DVI, and HDMI—each require their own internal clock. The magic of DisplayPort in this context is that it allows users to drive multiple displays from only one external clock. This external clock is what allows Eyefinity to fuel up to six monitors from a single card. If the card design accommodates it, all six monitors could be based from the same clock. However, given the profusion of legacy displays today and the relative dearth of DisplayPort screens, Eyefinity implementations currently provide for two legacy displays.

Evergreen Crossbar


http://i46.tinypic.com/9ks1tg.jpg

From this diagram of the display engine behind Eyefinity, you can see how a four-port card could be alternatively configured. You could have one VGA port, one DVI, and two DisplayPorts, for example. With the proper adapters, your configuration options expand considerably. Converting from legacy to legacy, as with the DVI to VGA example in configuration #5 above, requires a passive adapter. Similarly, according to AMD, “if only one or two DVI/HDMI monitors are attached through a DisplayPort connector, then only simple passive adapters are required.” A passive adapter performs no signal conversion; it merely acts as a pass-through. However, going from DisplayPort to legacy Dual-Link DVI or VGA requires an active adapter.

Pass-Through Passive Adapter


http://i49.tinypic.com/2rr8nqh.jpg

Screen Groups

What sort of display arrangements can you make with Eyefinity? You can use the Duplicated (cloned) mode to copy one desktop onto multiple screens. Laptop users do this all of the time for presentations. Alternatively, Extended mode lets you span one workspace across multiple screens, a grouping AMD calls a “single large surface.”

At its simplest, Eyefinity lets you do basic dual-screen setups, just as you would with a traditional dual-output card. Screens can be set in 2x1 landscape, 2x1 portrait, or 1x2 landscape. Interestingly, AMD kept its eye on streamlining the user experience without limiting reasonable options. For instance, you won’t find a 1x2 portrait group configuration because there’s no common use scenario that supports such a tall, narrow display. Why clutter up the configuration UI with an option for it? The same three orientations apply for triple-screen viewing: 3x1 landscape, 3x1 portrait, and 1x3 landscape.

3x1 Battle Forge


http://i47.tinypic.com/118kflt.jpg

Stepping up to four monitors, there are only two configurations offered: 4x1 landscape and 2x2 landscape. When you see shots such as the 3x1 portrait Battle Forge example, you have to wonder, “OK, why not 4x1 or 5x1 portrait?” Apparently, AMD’s research led them to decide that the number of people who might use such a mode didn’t justify including the option in the driver. And curiously, there actually are no five-screen modes.

For six monitors, there is only the 3x2 landscape option.

Now, what we’ve described here are your options for “display groups.” You can also create “Extended” groups. These are essentially separate desktop spaces that can run alongside your primary display group. You can see some examples in the image below. You might have a 3x1 portrait display group of 24" displays on your desk but have a separate 19" extended screen mounted to your wall for messaging apps and perhaps another 15" extended screen (making three groups total) for showing system temps, fan speeds, overclocking tools, and so on.

Eyefinity Scenarios


http://i47.tinypic.com/ohw6.jpg

The theoretical maximum for today’s Eyefinity technology specs a maximum 8192x8192 (67.1 megapixels) resolution, figuring six 2560x1600 panels.

Software Configuration

Following ATI tradition, AMD uses the Catalyst Control Center (CCC) rather than a separate utility for configuring and managing all Eyefinity operations. Let’s say that CCC auto-detects that you have three monitors attached. These will show up in a row along the bottom area of the UI as disabled displays until you enable them. When you right-click a disabled display, you’ll have options to use that screen as a clone, make it the new active display in place of another, or extend a desktop onto it. Alternatively, pulling up the properties for a desktop group lets you select the total desktop resolution, color bit depth, rotation, and the refresh rate. The possible resolutions shown as options are based on the resolution modes for your monitors as detected by the driver.

CCC Desktop Group



One of your first tasks will be to create a display group by going to the CCC’s menu bar, clicking Graphics, choosing Desktops & Displays, right-clicking on the main display shown and picking Display Group > Create Group. If you want a group in portrait orientation, you’ll have to begin by rotating your initial display, then creating the group.

CCC Create Group



When you have three or more displays in a group, use the Select Layout option to pick a display group configuration. AMD’s drivers are smart enough to only display configuration options that are possible for your number of attached monitors. The CCC has a nifty shortcut in that if you pick a group configuration that matches the number of available displays, the drivers will automatically select all of the screens and lump them into a group for you.

CCC Group Layout



In AMD’s marketing, you’ll find that all of the monitors shown in a display group are the same model. In the real world, this isn’t likely to be the case. You’ll probably have a mix of new and old displays you want to leash into a group and/or extended groups. You can use monitors with different resolutions, but Eyefinity will force all monitors in a display group into the lowest common resolution and orientation. Extended groups can be different resolutions, but obviously your main display group is the chief concern. Because you’re having to work with the lowest common denominator between the screens, this is why it’s always best to have your main display group comprised of identical screens.

If you’ve ever set up a multi-monitor config in the past, you know what a headache it can be to figure out which screen plugs into which port that’s seen as a given screen number by the driver, all of which you have to track so you can play musical monitors in the UI until the screens flow in the order you want. Eyefinity remedies that mess with a new wizard that runs for each new display group. In the UI’s main area, you’ll see a grid representing your monitor configuration. Your displays will black out, then the wizard will turn one blue. Just click on the grid cell for the highlighted monitor. The wizard does the rest, and you have a fully configured group in just seconds.

CCC Wizard



On the off chance that you need to regularly change your multi-monitor arrangement, be sure to create and save a profile for each configuration. You can even create a hotkey macro under the Activation tab to toggle between profiles.

continued