OK, been in the making.... for some time... & today I finally got with one of the developers.
it boils down to this...
1. Any version of Office 2010 you want to install and use...
2. Activate with KMS Activator...(which converts to VL)(search for CODYQX4 ez activator)
3. You test to see that you have 1 to 5 rearms left....
3a. you use CODYQX4 program to check this....for rearms (if 1 to 5) then
3b. You use CODYQX4 ez activator to Activate.
3c. You can use CODYQX4 program to verify your ACTIVATED. (sometimes KMS fails to Activate even when it says successful)
once your Activated... then use
4. IORRT to check status -verify activated (never hurts to be sure your Activated)
4a. Install IORRT ask for rearm.....
4b. IORRT to check status ---(note the timer)(close IORRT)---wait about 2 min
4c. Open IORRT and check status again.... note timer it should be less than in 4b. if this is 100%
4d. close IORRT.
5. open task scheduler and delete the KMS Activator....(YES DELETE) you no longer need it.
REASON:
If IORRT is active, every time you reboot it will auto reset the timer back to 30 days .... and counts down...
Mentioned program(s) can be found on (MyDigitalLife) ... or search for CODYQX4 Toolkit and Timesurfer IORRT with google.
